Resin Pathways
Resin Bonded Paths
Textured, grippy resin bonded surfaces where loose gravel is scattered onto a resin coat, giving a gravel look without the stones moving.

What's involved
Resin bonded surfaces are different from resin bound. A layer of resin is spread over a sound, non-permeable base such as concrete or tarmac, and dry gravel is broadcast over it until the resin is covered. Once it cures, the excess is swept up, leaving a single layer of stones stuck to the surface. The result looks like gravel but does not move underfoot, and gives good grip on slopes and steps. It is not permeable, so water must run off to a drain or soakaway, and in front gardens this can affect whether planning rules are met. Resin bonded surfaces are thinner, cheaper and quicker to lay than resin bound, but can lose stones over time in heavy-use areas. Installers usually recommend it for slopes, ramps and low-traffic paths.
How we handle it
Tell us about your path
Use the quote form to give the length, width and current surface, and say whether you want resin bound or bonded. Photos of the path, edges and any steps or drains help installers price quickly and accurately.
Survey and samples
A local installer checks whether the base can be overlaid or needs replacing, looks at levels and drainage, and shows you aggregate samples. They will explain edging options and borders.
Fixed quote
You receive one price covering base works, edging, resin, aggregate and labour, plus waste removal. The quote states the resin depth, base build-up and aggregate blend so you can compare quotes properly.
Base preparation and laying
Any digging out and base building is done first. On laying day, dry aggregate and resin are mixed on site and trowelled to an even depth. Work is planned around dry weather and suitable temperatures.
Curing and handover
Paths are taped off while the resin cures, usually six to eight hours for foot traffic. The installer explains when it can take furniture or vehicles and how to keep it clean.
Price guide
Resin pathways are usually priced per square metre, and the biggest variable is the base. Overlaying a sound existing surface is much cheaper than digging out and building a new permeable base. Small paths carry a minimum charge because the team, mixer and setup are the same whatever the size. These guide prices are typical for the UK in 2026.
- Resin bound overlay on sound existing surface: £45–£70 per m². Cleaning, crack repairs, primer and 15–18mm resin bound layer with standard aggregate blend.
- Resin path clean and moss treatment: from £150. Pressure cleaning at a safe angle and treatment to restore drainage on a typical path.
- Edging: £15–£35 per metre. Aluminium, steel, block or brick edging to contain the resin and define the path.
Questions about resin bonded paths
How much does a resin path cost per square metre?
Resin bound paths typically cost £45 to £70 per square metre when laid over a sound existing surface, and £85 to £130 per square metre when a new base is needed. Resin bonded surfaces cost less, around £35 to £55 per square metre. Small paths usually carry a minimum charge.
What is the difference between resin bound and resin bonded?
Resin bound mixes stone and resin together and trowels it smooth, creating a permeable, loose-stone-free surface. Resin bonded spreads resin first and scatters stone on top, giving a textured gravel look that is not permeable. Bound is smoother and drains through; bonded is grippier and cheaper.
How long does a resin bound path last?
A well-laid resin bound path on a sound base can last 15 to 25 years. The base and installation quality matter most. Cheap non-UV-stable resin, thin layers or poor bases lead to cracking, loose stones or discolouration much sooner.
Other services
Resin Bound Garden Paths
Smooth, permeable resin bound paths for back gardens, laid on a new open-graded base or a suitable existing surface.
Resin Front Paths and Entrances
Front paths, door approaches and steps in resin bound stone, finished neatly to thresholds, drains and boundary walls.
Resin Overlays on Concrete and Tarmac
Resurfacing sound existing concrete or tarmac paths with resin bound stone, after repairing cracks and adding movement joints where needed.
Resin Patios and Garden Areas
Patios, seating areas, tree pits and pool surrounds in resin bound stone, often combined with paths for a continuous finish.
Resin Path Repairs and Cleaning
Cleaning, unblocking and repairing resin bound paths, including patch repairs, crack repairs, edge fixes and restoring permeability.
Resin Bonded Paths near you
Get a free resin pathways quote
Tell us what you need and we'll come back with a clear price.
Request a quote