Resin Pathways

Guide · Homeowners · 4 min read · Updated 17 November 2026

How to Clean and Maintain a Resin Path

Short answer

Keep a resin bound path in good condition by sweeping regularly, removing leaves before they rot, and washing a few times a year. Use a pressure washer at a low angle and safe distance, or a stiff brush with a suitable cleaner. Treat moss and algae in shaded areas, deal with stains promptly, and keep the surface pores clear so the path stays permeable. Professional cleans start from £150.

How to Clean and Maintain a Resin Path

Why resin paths still need care

Resin bound paths are low maintenance, not no maintenance. Because the surface is porous, dirt, leaf debris and organic matter can settle into the small gaps between the stones. Over time this can clog the pores, reduce drainage and give moss and algae somewhere to grow, especially in shady, damp areas under trees or on north-facing paths.

A simple routine keeps the path looking clean and draining well, and prevents problems that are harder to fix later.

A simple maintenance routine

Regular sweeping is the most important task. A stiff brush removes dirt and leaves before they break down and work into the surface. In autumn, clear fallen leaves frequently, as they stain and rot quickly. A few times a year, wash the path to lift dirt out of the pores.

The amount of care a path needs depends on its setting. A sunny, open front path away from trees may need little more than sweeping and an annual wash. A shaded back garden path under trees, where leaves, needles and seeds fall constantly, will need sweeping more often and probably an occasional moss treatment. Paths next to lawns and borders collect soil and grass cuttings, so brushing them off after gardening keeps the surface clean.

TaskHow oftenWhy
Sweep with a stiff brushWeekly or as neededRemoves dirt before it settles in
Clear leavesFrequently in autumnPrevents staining and rotting
Wash or pressure cleanA few times a yearKeeps pores clear and drainage working
Moss and algae treatmentAs needed in shaded areasStops growth taking hold
Check edges and jointsOnce or twice a yearSpots damage early

Pressure washing safely

A pressure washer can clean a resin path well, but it must be used carefully. Hold the lance at a low angle to the surface rather than pointing it straight down, keep the nozzle at a sensible distance and keep it moving. A rotary surface cleaner attachment helps give an even clean. Too much pressure too close can damage the resin or dislodge stones, especially on older paths.

If in doubt, start in a hidden corner and check the result. A stiff brush with water and a suitable cleaner is a gentler alternative.

  • Use a low angle, not straight down
  • Keep the nozzle at a sensible distance
  • Keep the lance moving
  • Test a small hidden area first
  • Consider a rotary surface cleaner attachment

Moss, algae and weeds

Moss and algae thrive in shade and damp. Treat them with a product suitable for resin surfaces, following the manufacturer's instructions, then brush or wash the dead growth away. Improving light and airflow by cutting back overhanging plants helps prevent regrowth.

Weeds rarely grow through a properly laid resin bound path, because there are no joints and a membrane is laid beneath on new bases. Occasionally seeds blow in and root in debris on the surface or at the edges. Pull them out early and keep the surface clean.

Lichen can also appear on older paths as small, flat, crusty spots. It is slower to grow than algae and harder to remove, but suitable treatments and gentle brushing will usually clear it over time. Prevention through regular cleaning is easier than removing established growth.

Dealing with stains

Spills such as oil, food, drinks and barbecue grease should be cleaned up as soon as possible, as they can soak into the porous surface. Blot the spill, then wash with warm water and a mild detergent. Avoid strong solvents and harsh chemicals, which can damage or discolour the resin.

Rust marks from metal furniture and stains from leaves or berries may need a specialist cleaner. If a stain will not shift, a professional cleaner can often help.

Chewing gum is best removed by freezing it with ice and scraping it off gently with a plastic tool. Tyre marks from bikes and mobility scooters usually wash off with warm soapy water and a brush. For paint spills, act quickly and seek advice before using any solvent, as some products can soften or mark the resin.

Repairs and restoration

Resin paths can be repaired. Damaged patches can be cut out and relaid, edges can be fixed, and cracks can be repaired. Colour matching is possible, though new resin may look slightly different from weathered resin at first. A professional clean and moss treatment typically starts from £150 for a typical path and can restore both appearance and drainage.

If a path is failing widely, with loose stones or extensive cracking, the cause is usually the base or the original installation, and patch repairs may not be enough.

Ask the original installer for the name of the aggregate blend and resin used, and keep a note of it. That makes it much easier to colour-match any future repair. Some installers leave a small bag of the same aggregate with the customer for this reason.

What to avoid

Avoid dragging heavy or sharp items across the surface, and protect it when using equipment such as skips or scaffolding. Do not use rock salt heavily in winter, as it can leave residues; a little is generally fine but check the installer's guidance. Avoid lighting barbecues or fire pits directly on the resin.

Through us, you can request quotes from vetted, insured local resin specialists for cleaning, repairs or a new path.

Questions people also ask

Can I pressure wash a resin path?

Yes, with care. Use a low angle, a sensible distance and keep the lance moving, or use a rotary surface cleaner attachment. Too much pressure too close can damage the resin or loosen stones. Test a small hidden area first if you are unsure.

Why is my resin path not draining?

The most common reason is that the pores in the surface have clogged with dirt, moss and organic debris. A thorough clean usually restores drainage. If the path was laid over solid concrete, water must run off the surface, so puddles may point to poor falls rather than clogging.

How long does a resin path last?

A well-laid resin bound path on a sound base can last many years with simple maintenance. Lifespan depends on the quality of the base, the resin and aggregate, the installation and how the path is used and cared for. UV-stable resin helps it keep its colour.

Written and checked by the Resin Pathways team. Read our editorial policy.

Get a free resin pathways quote

Tell us what you need and we'll come back with a clear price.

Request a quote